Environmental Monitoring Probe product image

Eaton Environmental Monitoring Probe (EMP)

The EMP 116750224-001 is now End of Life and replaced by EMP001

The Eaton Environmental Monitoring Probe (EMP) is a device that enables the Web/SNMP adapters and web enabled ePDUS to monitor also temperature, humidity and the status of two additional contact devices, such as a smoke detector or open-door sensor. The information from the EMP is available on the web interface as well as through SNMP. All notification methods such as email can be utilized and if user-defined thresholds are exceeded protected computers can be shut down in a controlled fashion with shutdown software.

Features & Benefits

  • Simple, in-service installation using standard CAT5 cable to connect to the communications port on the ConnectUPS
  • Supports Web/SNMP card in UPS as well as web enabled ePDUs

 More Eaton Environmental Monitoring Probe features & benefits... 

Product Snapshot
 Type:  Environment monitoring device
 Compatibility: 10/100Mb ConnectUPS-X, ConnectUPS-BD and ConnectUPS-E with FW V3.01 and higher
 Dimensions
 (LxWxH):
  57.6 x 37.6 x 29.3 mm
 Weight:  34 g
 Part Number:  116750224-001
Related Information
Product Summary
Features and Benefits
Product Literature
Technical Specs
FAQs
ConnectUPS Web/SNMP Card Test Drive